Settings Library
reviewed
Prusament PETG V0 Settings for the Original Prusa MK4
Prusa's product-specific PETG V0 temperatures, sheet cautions, and drying guidance, with clear limits on what an MK4 profile or print test establishes.
Tag index
build-plate
Guides connected by this tag.
Settings Library
reviewed
How to Adapt a Print Profile After Changing a Nozzle, Plate, or Slicer
A staged compatibility and validation workflow for adapting a 3D-printing profile after a hardware, material, firmware, or slicer change.
Nozzles, Plates & Hardware
reviewed
Choosing and Preparing a Build Plate
Match a build plate to the printer, material product, geometry, surface finish, adhesion goal, release risk, and the profile or first-layer checks required after the swap.
Printers & Compatibility
reviewed
Printer Capability Boundaries for Materials and Hardware
Use model-specific specifications to check printer capability before tuning, while keeping official support separate from tested settings and performance.
Settings Library
reviewed
PETG Starting Settings for the Original Prusa MK4
Prusa's PETG starting guidance for an Original Prusa MK4, including plate cautions, dry-state checks, and a staged way to validate the first print.
Troubleshooting
reviewed
First-Layer Gaps, Ridges, and Curling: An Ordered Diagnosis
Use the shape and location of a bad first layer to separate plate, calibration, material, temperature, flow, and geometry causes without copying a universal Z offset.